Invitation to our customers! 
 
NANO- Z -COATING LTD will participate on 13-17 / 9/2016
at the world's largest automotive fair AUTOMECHANIKA
HALL 9.1 booth D-69 in Frankfurt, Germany, for there all automotive products family.
 
We will be happy to meet you there. SEE YOU !!

 

 
 
 
 
N.C.C. Coating for Sealing, Insulation, Heat and Radiation Reduction
What is N.C.C.?
 
N.C.C. was designed in a unique structure, XXXX, for sealing, insulating and blocking radiation and heat under harsh condition, for significant savings in energy for cooling and heating. It also provides effective protection from burns and heat damage for human beings.
 
N.C.C. is composed of four thermo ceramic materials in combination with a primary titanium pigment that creates the most advanced material in the world, which is the result of a unique, patent protected development.
For What is it Intended?
  • For exterior and interior walls and ceilings directly on concrete, blocks, gypsum, asbestos, metal, aluminum, wood and more, without fear of “dragging” the covering down and exposing the surface.
     
  • For protection and coating surfaces of varying, and extreme, compositions and expansion of materials, for example: a concrete roof with a plastic drainpipe, fiberglass cooling chest with an aluminum frame, on wood sailing vessels next to metal and more.
     
  • The linking primer series provides N.C.C. with first rate adhesive properties with almost any material such as:  concrete, stone, metal, aluminum, fiberglass, polyurethane, asphalt sheets, wood gypsum and so on.
     
  • For sealing and insulating buildings and ceilings of asbestos, Iskor, prefabricated material, blocks, wood, plastic, concrete, cement board, terra cotta and even tents and cloth awnings. These capabilities are not limited only to what was previously mentioned but could also apply to an integrated surface with a variety of materials.
     
  • For exterior (positive) and interior (negative) sealing of shelters, and basements, also in the proximity of seawater. 
     
  • Excellent adhesion to asphalt and bitumen sheets.
     
  • For cooling chambers in trucks, cold storage, refrigerated containers and so on.
     
  • For insulating air-conditioning pipes and heating conduits.
     
  • For insulating and significantly reducing temperatures in chemical tanks, food containers, water, gas and petroleum pipes and more.
     
  • For factories and facilities with an abundance of pipes and tanks, in which integrated protection is required against corrosion together with massive, significant and effective thermal insulation, such as water- and oil-rigs, gas tanks, petrochemical industries and so on.
     
  • For ships, harbor facilities and in the marine environment. (Salt-water durability test: 2,000 hours).
     
  • Sealing of tunnels, concrete and plastic sewage pipes, water and chemical canals.
     
  • Preservation and protection of concrete or metal bridges or a combination of both.
     
  • Simple application by brushing or spraying with a satin finish.

     
How Does N.C.C. Work?
 
N.C.C. provides a massive thermal insulation for up to 1490C. It sheds and reflects heat and radiation thereby preventing the “build up” and accumulation of heat in the surface.

These properties provide N.C.C. with an amazing and unique ability to reduce temperature by about 150C in the coated surface. For example, in a structure made of concrete, prefabricated material, a metal container or blocks, the difference in temperature between the interior and the exterior can reach 32 degree outside and only 17 degrees inside the structure!

 
In addition the precise composition of the four ingredients produces a very strong and mechanically stable (strength failure under tension is PSI 110 in comparison to a vehicle tire with PSI 32) insulating and sealing capability and extraordinary flexibility (up to seven times the initial value) and together with first rate (99.5%) solar blocking of ultraviolet (UV and infrared (IR) an exceptional result of natural cooling and insulation is achieved at levels that no other combination or composition of materials has yet achieved.

 
Typical Properties and Advantages of the Protection:
  • Saves on and significantly reduces costs of cooling/heating.
     
  • Creates a robust and flexible membrane layer that drastically reduces the expansion and contraction of the coated surface caused by extreme changes of temperature and thereby assists in preventing cracks and fractures.
     
  • Designed for durability and stability under difficult conditions for at least 10 years and can be renewed under controlled conditions for up to 20 years.
     
  • Excellent for application on expansion seams.
     
  • Significantly reduces the level of noise and rain by up to 68%, especially on Iskoor, asbestos, tin, polygal roofs and so on.
     
  • Designed to prevent corrosion and deterioration of the surface, as a result of its high durability to abrasion.
     
  • Resistant to mold, fungus, mildew and seaweed.
     
  • Durable in a marine environment and underwater environment. (Durability in saltwater test: 2,000 hours).
     
  • Remains flexible in all weather conditions.
     
  • Awarded the international Energy Star Standard, the American NSF Standard, UL, FM Global Approval and others. It is especially recommended by independent institutions of experts throughout the world, for example: the European DNV, RCI (organization of builders and gardeners in the USA) and others.
     
  • It has been proven and applied in large-scale international projects such as oil-rigs, ships, gas and petroleum conveyance projects in Azerbaijan, gigantic gas tanks in Russia, American forces in Iraq including utilization for insulating cloth tents and more.
     
  • Is available in about 30 light shades, and in addition can be ordered in any required shade.
     
  • Can be applied by do-it-yourself means or by standard industrial airless systems.
     
  • The surface will actively repel water when fully dry. Cleaning abrasion durability is achieved only after 24 hours.

Coverage Capability:
400 microns thickness wet or 250 microns dry.

Packaging:
19 liters. Shelf life: 3 years in a cool shaded location.

Remarks:
All the data supplied is to the best of the knowledge and experience of the company in Israel and abroad, however the customer is not exempt from his obligation to test the product prior to actual application on the intended surface. The company supplies preliminary testing and suitability services for any surface intended for coating.
   
     
 
shedlovski 1, yavne, Israel
Tel. +972-3-7166565
Livecity - Website Builder