Invitation to our customers! 
NANO- Z -COATING LTD will participate on 13-17 / 9/2016
at the world's largest automotive fair AUTOMECHANIKA
HALL 9.1 booth D-69 in Frankfurt, Germany, for there all automotive products family.
We will be happy to meet you there. SEE YOU !!


Z-500/E For cleaning and removing the concrete secretions from the building lining and tough dirt
For what is it intended?
Cleaning and removal from surfaces: Lime stone / Hebron stone, ceramics, granite, porcelain, tiles, marble, paving stones and any other mineral surface.
How does it work?
The Z-500/E technology performs deep penetration into the surface and breaks down the chemical bonds of minerals and deep dirt that is not connected with the type of surface. The cleaning operation: it breaks down and ferments the dirt / cement / lime, there by facilitating easy washing and removal. The removal process: It penetrates 2 – 3 mm into the depth of the cement / lime, softens and breaks it down, and allows easy removal by means of water pressure.
Typical characteristics and benefits of the product:
  1. The product works very rapidly (about one minute).
  2. It does not damage the tile or the glaze. (Follow the instructions).
  3. Also suitable for removal of all types of tough dirt and various stains on tiles, concrete, stone, and so on.
Application instructions: 
  1. Disintegration and removal: without dilution. 
    For particularly absorbent surfaces such as lime stone dilute 1:1 or 1 part material with two parts water (1: 2). Disintegration time varies according to the type and thickness of the cement / lime.
    Cleaning and removal of dirt: Dilute 1:2 or 1:3 depending on the type and depth of the dirt and oiliness. (For example: after renovation 1:2).
  2. Distribute using a mop, spray, brush directly onto the dirt until full wetness of a surface area that allows removal within one minute.
  3. Wait until fermentation is finished (about 1 – 2 min.)!! Rub with a hard synthetic brush and remove residue using a removal tool such as a putty / scraping knife, pressure washer at a pressure of at least 200bar!

    • Use of a pressure washer at a higher pressure can save the need for scrubbing with a brush.

  4. Rinse well with running water. For household cleaning - wipe and dispose of the residue immediately into the sewer with wiper / vacuum cleaner for liquids / damp cloth.
    * Do not leave residue of the material on the surface!!

  5. It is possible to apply again, only after washing and collecting the residue of the previous time.
  6. It is mandatory to use with gloves, face mask and protective clothing.
Packaging: 750 ml: 4 liters: 20 liters
The shorter the passage of time since the damage occurred – the easier the cleaning and removal will be.
** Leaving the product on the surface can cause damage. Pay attention to the removal time. 
Remarks: All the data is according to the knowledge and experience of the company both in this country and abroad, however this does not exempt the customer from his obligation to test the material prior to actual application on a small hidden area. The company’s responsibility is limited to production defects alone and to refunding the cost of the product at the company’s premises, or replacement of the product at the sole discretion of the company. Nano Coatings supplies testing and preliminary suitability services for any surface intended for coating.
shedlovski 1, yavne, Israel
Tel. +972-3-7166565
Livecity - Website Builder