Invitation to our customers! 
NANO- Z -COATING LTD will participate on 13-17 / 9/2016
at the world's largest automotive fair AUTOMECHANIKA
HALL 9.1 booth D-69 in Frankfurt, Germany, for there all automotive products family.
We will be happy to meet you there. SEE YOU !!


Z-600 - Remover of Stone Inflorescence (white powder) and Rust Stains on Stone, Concrete, Marble 
What is Z-600 Stone Inflorescence Remover?
Z-600 is an environmentally friendly,organic, durable mineral-based preparation that easily and effectively removes the phenomenon of “stone inflorescence or white powder that appears on the surface of concrete, stone, marble and on any mineral surface, as well as rust stains on those surfaces. Z-600 is user and environmentally friendly, does not contain aggressive caustic ingredients, does not harm the surface texture, does not harm the surroundingsof vegetation, is almost odorless and is intended for both interior and exterior use.

After                                                                                  Before
Z-600 allows neutralization of the problem of corrosion and stains,caused by these phenomena and facilitates implementation of protection for sealants or other advanced materials based on nano technology coating.
Z-600 is the mosy effective non-aggressive solution to the phenomenon of “stone inflorescence” or white powder that appears on the surface of concrete, stone and marble as a result of accumulation of various minerals containing calcium and salts, which permeate out of the stone and appear as a white powder on various areas of the walls and horizontal surfaces. This powder can also appear because of defective infrastructure permeation (incorrect mixture of mortar, powdersand so on), through the stone to the exterior surface of the stone / concrete.
Z-600 is also particularly effective in the removal of rust stains in those areas where these stains have “surfaced” or appeared on the stone / concrete surfaces.
Z-600 was designed according to the American Standard for very low VOC and was approved for use in all 50 states of the USA.
Z-600 is adapted to work with all the company's protective products such as BO-STONE or Nano Stone ST-1.
Coverage: Gallon 3.8 liter: 20 – 30 m² / liter; 18-liter can: 90 – 140 m² / liter, depending on the surface type, texture, absorbency, thickness, inflorescence and so on.

Application: Can be diluted up to a ratio of 1:4 and is applied by spraying / brushing until absorbed. Allow the material to remain in place until the fermentation ends and remove with a water pressure cleaner. An extra layer may be necessary.
Before applying a sealer of any kind, it is necessaryto ensure a thorough and complete removal of the Z-600.
Do not allow the Z-600 to remain on the surface for too long. Remove immediately after completion of the fermentation in order to minimize the surface deterioration.
Cleaning of tools: Immediately after use with running water.
Packaging: Gallon 3.8 liter: 18 liter can.
Transportation and storage: In the original and closed container the product will keep for up to a year,in a closed, shaded and ventilated place.
Safeguards: Although the product is user and environmentally friendly, always use protective measures.
Remarks: All the data is according to the knowledge and experience of the company both in this country and abroad, however this does not exempt the customer from his obligation to test the material prior to actual application on a small hidden area. The company’s responsibility is limited to production defects alone and to refunding the cost of the product at the company’s premises, or replacement of the product at the sole discretion of the company. Nano Z Coatings supplies testing and preliminary suitability services for any surface intended for coating.
shedlovski 1, yavne, Israel
Tel. +972-3-7166565
Livecity - Website Builder