Z-500
Post-construction clean-up. Cleans and removes accidental grout, cement, and other tough dirt after construction or renovation
What is Z-500:
The Z-500 technology penetrates deeply into the surface and decomposes chemical bonds of minerals and deep dirt that are not connected to the type of surface. Z-500 works only on the grout and does not damage tiles.
For what is it intended?
For cleaning and removal from the following surfaces: ceramics, porcelain granite, floor tiles, marble, limestone, paver stones and any other mineral surface. For renewal and removal of old, dirty and damaged grouting very easily.
How does it work?
The Z-500 technology penetrates deeply into the surface and decomposes chemical bonds of minerals and deep dirt that are not connected to the type of surface.
In the cleaning action: It decomposes and ferments the dirt/cement/grouting/whitewash and thereby makes cleaning and removal easy, by means of a damp cloth or scrubbing and rinsing.
In the removal action: It penetrates to a depth of 2—3mm into the grouting/cement/ whitewash and decomposes them thereby making the removal easy and convenient.
Characteristic attributes and advantages of the product:
-
The product works very rapidly (in about one minute) and facilitates cleaning and/or easy removal of the grouting itself and/or the oils and difficult dirt embedded in it. (For example, in the kitchen, garage and so on).
-
Does not damage the tile or the glazing. (Please follow the instructions).
-
Suitable also for removing all types of tough dirt and various stains on tiles, concrete stone and so on.

Manner of application:
-
Decomposition and removal: Do not dilute.
For especially absorbent surfaces such as Hebron Stone dilute 1:1 or 1 part material to 2parts water (1:2). Decomposition times vary according to the type of grouting/cement/whitewash.
For cleaning and removal of dirt:
Dilute 1:2 or 1:3 depending on the type and depth of the dirt and oiliness. (For example, after renovations – 1:2).
-
Disperse with a squeegee, spray or brush directly on the dirt until the complete dampness of an area that can be removed within one minute!
-
Do not wait for more than one minute! Scrub and remove residue with a removal tool such as a hard brush or scraper, grouting opener, screwdriver or a high pressure cleaner at a setting of 200 bars.
-
Rinse well with running water. Mop up and dispose of the residue using a squeegee/vacuum cleaner for liquids/damp cloth.
*Do not leave remnants of the material on the surface!
-
It can be applied a second time only after rinsing and removal of the residue from the previous time.
-
The grouting can be renewed once the area is clean and dry.
-
The use of gloves is highly recommended.
Packaging:
750ml; 5 liters; 18 liters.